Skip to content
English
Sign in
Contact us
  • There are no suggestions because the search field is empty.

Why after swapping/installing my I-drive controller the unit goes in the opposite direction?

This guide will help you get the i-drive controller to go the correct direction.

f the unit is running backwards after replacing the controller it means the 2 motor wires need to be swapped. It will be wires 9 and 14 at the controller labeled by 1 and 2 on the controller for the 70A controller. On the 140A controller it will be M- and M+. Please see the below diagram for the 70A controller. It will be the same on the 140A controller.